Making a £13000 turntable

  दृश्य 2,071,827

New Yorkshire Workshop

महीने पहले

Another daily grind video, this time the full construction process of a Garrard 301 turntable plinth from start to finish. These layered ply plinths are what I most commonly make.


edit to add, forgot to mention a thanks to Bob at Inspire Hifi for providing the last clip of the completed turntable in use.
The music used was Blow the man down by the Midshipment glee club from the INcds copyright free music library. this is not the original music being played in the clip; I had to edit in the above to avoid copyright infringment.

टिप्पणियाँ
Modernart Property Services
Modernart Property Services 5 घंटे पहले
Price seems cheap considering just the tonearm alone is around $7000US
Berk Trapdoor
Berk Trapdoor 13 घंटे पहले
Yeah, but 13 grand though. Do you think you'd be able to hear the difference to one that cost 1 grand? I think not.
POLICE STATE
POLICE STATE 17 घंटे पहले
Class act all the way. Love your work.
Elbas tardo
Elbas tardo 22 घंटे पहले
13000 hostias vale eso. :D
Kees Aben
Kees Aben दिन पहले
Wauw, just wauw, that is perfection, why am i not rich😭😭😭😭😭.
IonixGame
IonixGame दिन पहले
You are a craftsman .. !! :)
Joe Giudice
Joe Giudice दिन पहले
This is awesome!
larrylewislarry
larrylewislarry दिन पहले
The side polishing machine is lovely to watch. A nice piece of gear.
The Hepps
The Hepps 2 दिन पहले
A beautiful work of art - well done !
Juan Sólo
Juan Sólo 2 दिन पहले
Gran trabajo!!
TexTom1981
TexTom1981 3 दिन पहले
Others have said it along the lines of "why make such a deck for that table"....or that assembly.... there are some truly amazing decks out there for less money. LP12 amongst the top of the list. this is a beauty of a project, but I have to question the cost and the actual sound coming from it.
Yuriy Avd
Yuriy Avd 3 दिन पहले
молодец, профессионал!
Zeus .Edwards
Zeus .Edwards 4 दिन पहले
i know no one is seeing the underside, but that was getting the same ocd treatment as the top. The client speaker boxes at the end of the video was going and get that same outer treatment as well to match that turntable. love the high solid clear for long-lasting and easy to clean. the rear plug was getting stainless steel alan key bolts to match the arm. but your work is so awesome if your clients paying that kind of cash for arms etc a little extra to push your limits for the perfect finish piece should be mentioned to them. every square inch of your fabulous work ., i'm subscribing !!
Patrick Kelly
Patrick Kelly 4 दिन पहले
Is this a record price for a turntable
Mark Ward
Mark Ward 4 दिन पहले
Just breath-taking to watch a real craftsman at work
Dougie
Dougie 4 दिन पहले
I have seen this before he is a Making a £13000 turntable every body
TheEdge -
TheEdge - 4 दिन पहले
All of this work so that you can install a dated Gerrard turntable....a turntable that is neither direct drive, nor belt drive? A turntable that uses an idler wheel (jockey pulley assembly) to operate? The wow and flutter must be off the charts! Thanks, but I'll stick with a good ol' SL-1200. Beautiful craftsmanship though!
tubeMonger
tubeMonger 4 दिन पहले
Breathtaking.
METALLUGA RFW
METALLUGA RFW 5 दिन पहले
Клааааааааааааааааааааас !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
panther105
panther105 5 दिन पहले
£13000...??? How do you figure? Made of plywood.....
Brian
Brian 5 दिन पहले
Very pretty, but i fail to see where the £13k value is. OK £10k for the hardware and £3K for the woodwork. Now I get it.
Andrea Galon
Andrea Galon 5 दिन पहले
Amazing job!!!
Ricopolico
Ricopolico 5 दिन पहले
That "granite slab" is too thin for his application. Hard to believe this rather minor bit of plywoodworking is commanding $19000 and its bottom goes without veneer. This is not making a turntable, it is merely making a turntable base. Anyway, it is no sign of genius when the cost is no object, but to bring this level of performance to the mass market is a different thing altogether. Still, it will come.
alan cunningham
alan cunningham 5 दिन पहले
amazing
Emmanuel Finot
Emmanuel Finot 5 दिन पहले
Garrard 401 ?
Asbury Park
Asbury Park 5 दिन पहले
Is there anyone with as much skill and knowledge.. I doubt it!
garry smith
garry smith 6 दिन पहले
A thing of great beauty, but, just out of curiosity, what does it weigh?
Virus Of Cyrus
Virus Of Cyrus 6 दिन पहले
£13,000 POUNDS?? So some extremely rich person actually paid that much for it? Because being DIY you obviously cant say its worth that much unless a (rich) person actually bought it for that price, which is also crazy.
Ross Stevenson
Ross Stevenson 6 दिन पहले
Beautiful! And I can see why it's 13.000 pounds!!
tony graf
tony graf 6 दिन पहले
Mercedes Benz 500E
Dwayne Donnelly
Dwayne Donnelly 6 दिन पहले
Ahhh my old Pioneer PL 112D is way better. 🤣🤣
velchuck
velchuck 6 दिन पहले
Absolutely amazing and beautiful.
stelios aktipis
stelios aktipis 6 दिन पहले
👏👏👏👏👏nice 👍👍
Bass Player
Bass Player 6 दिन पहले
I have a few guitars with exotic woods and this type of finish work, nothing better than wood....
Константин Бозелевский
Константин Бозелевский 6 दिन पहले
Он просто отпидарасил корпус и все?
Abdul Qayyum Abdullah
Abdul Qayyum Abdullah 6 दिन पहले
Would be hard pressed to not find a german rice guy who lives this kind of stuff.
wickfut (MarcB Sounds)
wickfut (MarcB Sounds) 6 दिन पहले
£23000 turntable that gets thrown into a hifi placed in the worst possible position in a room. more money than sense
Bob Rose
Bob Rose 7 दिन पहले
Great carpentry... I just noticed the Garrard 301 transcription deck. I always wanted a 401 in my youth, but couldn't afford it. My mum worked for Garrard in Swindon, halcyon days, before they were brought by a Brazilian company and disappeared. My only other comment is that the idler wheel would introduce rumble. I wonder how well this has been refurbed?
Alexander Reis
Alexander Reis 7 दिन पहले
Does this actually do anything for SOUND, or is it just a beautiful work of art?
S John Dee
S John Dee 7 दिन पहले
As a true craftsman you make it look quite effortless, it's beautiful to watch the process. How many have you produced to date?
rclc
rclc 7 दिन पहले
Awesome job!
muso1948
muso1948 7 दिन पहले
Excellent job - not that dissimilar to a luthier making a guitar.
muso1948
muso1948 7 दिन पहले
Dude -use a push stick on that dimension saw!
Wycliffe A.Okwaro (Information Technology)
Wycliffe A.Okwaro (Information Technology) 7 दिन पहले
clever
Wycliffe A.Okwaro (Information Technology)
Wycliffe A.Okwaro (Information Technology) 7 दिन पहले
thats match complicated wood work very very nice work
Sergiusz technik
Sergiusz technik 7 दिन पहले
Шикарная работа.
Blende 5.6
Blende 5.6 8 दिन पहले
13000 for what? No Suspension, no beltdrive, no dual cinch, …. nice woodwork, but that’s all. I like Rega, Tranzrotor, Thorenz, Clearaudio, …, but this product ist definitely not highend
john gabris
john gabris 8 दिन पहले
putting a 5 grand arm together with a garrard deck oh well
TheEdge -
TheEdge - 4 दिन पहले
john gabris - Exactly! How much sense does that make?
Dimitris Karaganis Official
Dimitris Karaganis Official 8 दिन पहले
!!!!! state of art ! congrats!
vasiley melnikov
vasiley melnikov 8 दिन पहले
Или все пылью припоздает?
vasiley melnikov
vasiley melnikov 8 दिन पहले
Верхняя крышка имеется?
peter stevenson
peter stevenson 8 दिन पहले
wow that is brilliant.
João Nelson Lima Tavares
João Nelson Lima Tavares 9 दिन पहले
Great job.
VisiBle
VisiBle 9 दिन पहले
Normal Craftsman : Use 3-4 types of coatings and shiners to make it look shiny. New Yourkshire Workshop : Uses 999 types of coatings and shiners so that the product owners can see their future through the reflection. Btw, enjoyed the video immensely. Helped me to relief for a bit during this new lockdown.
Luzil Carvalho
Luzil Carvalho 9 दिन पहले
Uma obra de arte! Congratulações!
radar
radar 9 दिन पहले
That is an amazing job.
Titus de los Santos
Titus de los Santos 9 दिन पहले
The art of craftsmanship, thanks for sharing
Rainforest
Rainforest 9 दिन पहले
This guy is a bloody artist
Yavor Toshev
Yavor Toshev 9 दिन पहले
👍💜🎶👌
arekusu
arekusu 9 दिन पहले
like!!!
jacek tomasz Lepczynski
jacek tomasz Lepczynski 9 दिन पहले
super
Abida Babida
Abida Babida 9 दिन पहले
nice work. You should use Urethane clear though. It’s much harder than acrylic. More resistant to scratching. But really nice job man.
FatPinarelloRider
FatPinarelloRider 10 दिन पहले
It's made of plywood. Not even worth £1300.
Hội Khuyến học Quảng Xương
Hội Khuyến học Quảng Xương 10 दिन पहले
video bạn làm rất công phu. Tôi thích và đăng ký xem kênh bạn mỗi ngày
Harry “Amwe88” Joseph
Harry “Amwe88” Joseph 10 दिन पहले
Now that's what I call a real turntable. Compare the mass with what some companies like Rega Planar are selling today !
andrew dawes
andrew dawes 10 दिन पहले
STUNNING
Steve Connolly
Steve Connolly 10 दिन पहले
Now we know just how much skill, work and special equipment are needed. Great video. Thanks.
Robot Stonka
Robot Stonka 10 दिन पहले
Amazing!!👏
Slesarka art
Slesarka art 11 दिन पहले
Спасибо!! красивая работа!!
Noob Tuber
Noob Tuber 11 दिन पहले
Where can someone get the record player that goes inside?
Catfish Gray
Catfish Gray 11 दिन पहले
GREAT JOB, GREAT VIDEO, [ UNBELIEVABLE ] HOW BEAUTIFUL { THIS IS ART }...BACK TO WORK
Veronica Alessandrello
Veronica Alessandrello 11 दिन पहले
WOW! stunning!
philip vale
philip vale 11 दिन पहले
Hi, N. Ys. Ws. I have watching some of your territorials you do some beautiful work, stay safe, Keep up the amazing work, Perfection is the ultimate goal. Phil from the Moulin in France
mrhearse777
mrhearse777 11 दिन पहले
At that price , I'd be frightened to use it !
Pierre M. Martelli
Pierre M. Martelli 12 दिन पहले
Beautiful work ! Mais tout ça pour écouter cette musique là ???…
ГЕНАДИЙ КОНТЮШОВ
ГЕНАДИЙ КОНТЮШОВ 12 दिन पहले
произведение искусств
MrPLC999
MrPLC999 12 दिन पहले
Wow what a gorgeous piece of woodwork! I can really appreciate the craftsmanship...BUT...even $100,000 cannot take the rice crispies out of a stinkin piece of vinyl. (Yes, I hate vinyl, and I have shelves full of it.)
NerdSweeper
NerdSweeper 12 दिन पहले
You could have made it 14000$ if you charged 14000$ for it, just saying.
John Austin
John Austin 12 दिन पहले
Whoa!!!!!❤️❤️❤️
John Austin
John Austin 12 दिन पहले
So killer❤️🤘❤️
Roberto Marchi
Roberto Marchi 12 दिन पहले
Un vero capolavoro !
Donald Evans
Donald Evans 12 दिन पहले
wow brilliant
m ofi
m ofi 12 दिन पहले
Well done. Still I prefer my own player.
NSK reviews
NSK reviews 12 दिन पहले
Outstanding !
Akim Basir
Akim Basir 12 दिन पहले
lots of coating layers. A real masterpiece!
sergio c
sergio c 13 दिन पहले
beautiful job, awful music :)
Andrew Varey
Andrew Varey 13 दिन पहले
very nice
claymore cluepile
claymore cluepile 13 दिन पहले
high end audio is a different world....nice front end plus sonus faber maxima speakers can put you right into the midst of the orchestra pit and choir, and you can identify where every singer is standing, and on a good day what they are wearing.....its hard to believe unless you get into the proper high end setup in a specialized acoustic room....this plinth is nice and builder has experience and confidence....to my way of thinking it came out looking too much like a piece of plastic with excessive plastic clear coating and an automobile finish....its nice but it doesn['t look like rare dense high quality dignified hardwood anymore....it looks like plastic veneer over plywood which is what it is.....for the price the customer paid you'd think he could be rewarded with honest real hardwood
claymore cluepile
claymore cluepile 13 दिन पहले
i should add that the finished item suffers from the defect of being too perfect....it looks like it was simply CNC machined out of a 3 cu ft block of patterned acrylic in about 6 hours.....it has no character....the artisan builder would do well to step back and consider how japanese artisans maike top end pottery and knife blades...they start with the purest best materials and then focus more on bringing out the 'soul' of the item than on a perfect machine-like shape and finish....every japanese high end blade has an irregular pattern on the cutting edge and the best japanese high end pottery is never perfectly round or true, but has the irregularities carefully curated into the pure base material preserved that are the mark of a master artisan, no just a skilled technician.......this plinth tradesman should up his game and start making plinths out of solid aged best quality hardwood hearts and leave the carefully selected and enhanced surface imperfections that compliment the material and identify the maker
Nicolas Gagnon
Nicolas Gagnon 13 दिन पहले
Please explain how a semi mass produced (using templates...) woodworker turntable is worth 13k POUNDS? I-N-S-A-N-E are those who would buy this at that price.
Joanne Clifford
Joanne Clifford 13 दिन पहले
blimey
Dave Hudson
Dave Hudson 13 दिन पहले
That is awesome, thanks for sharing.
Fabio A
Fabio A 13 दिन पहले
Amazing work.
Bryan Eisner
Bryan Eisner 13 दिन पहले
The wooden boxes the tone arm and stylus came in are of higher quality than my whole first turntable.
C Smith
C Smith 11 दिन पहले
My first thought was, what are they going to do with those nice little boxes? I imagine some customers hold on to them, but I bet plenty of them have no interest in keeping them.
E.F. R. (Muy Lejos Del Sol)
E.F. R. (Muy Lejos Del Sol) 12 दिन पहले
🤣😂🤣😂🤣😂🤦‍♂️🤦‍♂️🤦‍♂️ I was thinking the same.
Mike Heine
Mike Heine 13 दिन पहले
Sorry, but this is the "Tim Taylor Style". You're bungling something here. It looks high quality at first glance, but what materials you use and how you process them is really not good. There are really better ones. And for this price, it's just ridiculous.
SomeTingHuge
SomeTingHuge 14 दिन पहले
Boy Howdy, I want this to replace my Stanton t90!
Steve Bengel
Steve Bengel 14 दिन पहले
A functional thing of beauty
tripple
tripple 14 दिन पहले
Superb skill and great satisfactory kind of work,,,,
Gotham Antiquities
Gotham Antiquities 14 दिन पहले
That thing still looked wet!!! My man, you killed it and by the way let me hold one? I swear I’ll give it back! Great work and patient as hell!
C E Bradham
C E Bradham 14 दिन पहले
$18k? Wow. Very beautiful and classy....
Epoxy Inlay Dovetails Bluetooth Speaker Build
49:24
King Minhvuong
दृश्य 4M
Restoring Deba Knife. Japanese Chefs Knife Restoration
35:53
Making a BIG Hydraulic Cylinder Rod & Eye | Part 2
48:05
Cutting Edge Engineering Australia
दृश्य 724K
How to Make a Hand Welted Oxford [Full]
53:06
Terry Kim Shoemaker
दृश्य 434K
I built a guitar out of a shelf during quarantine !
26:01
Renovating a 160 year old staircase
31:29
New Yorkshire Workshop
दृश्य 865K
Making a traditional framed ledge and brace door in Oak
45:48
New Yorkshire Workshop
दृश्य 2M
BTS Toothbrush! #shorts
0:35
Dental Digest
दृश्य 720K